Description: Self-diagnostic error: HDD (Hard Disk Drive) : Detailed error code.Defective I/F between the video bridge device and i-controller Replace the i-controller.Video bridge device (ASIC) register error 1 The CPU detects the video bridge device, but detects error data from the video bridge device. Video bridge device (ASIC) error 1 The CPU does not detect the video bridge device. Reinstall the controller system firmware. If the ASIC timer does not function in the specified range, this SC code is displayed. Self-diagnosis error: ASIC The CPU checks if the ASIC timer works correctly compared with the CPU timer. Defective North Bridge and PCI I/F Replace the controller board.ASIC detection error The I/O ASIC for system control is not detected. Defective ASIC device Replace the controller.Causes: ASIC error The write-&-verify check error has occurred in the ASIC.Description: Self-diagnostics error: ASIC : Detailed error code.Reinstall the controller system software. When the problem cannot be fixed with the above procedure, the following information displayed on the screen needs to be fed back to a technical support center. The CPU detects an error and displays the specific error code with the program address where the error occurs. There are 47 types of error code (0001 to 4005) depending on the cause of the error. Causes: to to CPU error During the self-diagnostic, the controller CPU detects an error.Description: Self-diagnostics error: CPU : Detailed error code.Causes: HAIC-P2 error init died vm_pageout: VM is full USB error.One of the following messages was displayed on the operation panel. SD card data defective use another SD cardÄue to a control error, a RAM overflow occurred during system processing.OS Flash ROM data defective change the controller firmware.Description: Monitor Error This is a file detection and electronic file signature check error when the boot loader attempts to read the self-diagnostic module, system kernel, or root system files from the OS Flash ROM, or the items on the SD card in the controller slot are false or corrupted.The energy saving I/O sub-system detects an error. Description: Energy saving I/O sub-system error.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |